DEK-MASTER® Pro-Series 60 Mil Certified Vinyl Bundle

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 72" width - Sold by the linear foot - Roll length 75 lin ft - Can be cut to length.

Description: A solvent based neoprene rubber contact adhesive especially formulated for exterior vinyl applications. Very fast tack time for use on 45 mil and 60 mil vinyls.

Features: Waterproof, flexible in extreme hot and cold weather. Extremely fast tack time (exterior use).

Uses: Adhering Dek-Master® 45 mil and 60 mil vinyls. Spread rate 46 sq ft.

NOTE: 1 Gal pail will cover 46 sq ft of deck surface. (1 coat on back of vinyl and 1 on wood)
NOTE: 2 Gal pail will cover 115 sq ft of deck surface. (1 coat on back of vinyl and 1 on wood)

Description: A chemically activated, concentrated, all purpose cleaner and degreaser.

Features: Bio-degradable, economical, buffered pH, pleasant clean odour, free rinsing, non-flammable, convenient 1.9 L size dilutes to make up to 40 litres.

Uses: Ideally suited for cleaning and degreasing all around the house, yard, car, boats, RV's, Dek-Master® vinyls, sundecks, patios, concrete driveways, garden equipment, painted walls, fiberglass, aluminum and vinyl siding.

NOTE: Must be diluted with water to activate.

Product Coverage: 46 Square Feet per gallon

Description: A sealant that is an extremely flexible, single component, non-sag elastomer that bonds to wood, concrete, brick, stucco, and metals.

Features: High rubber content, flexible in cold weather, low shrinkage, paintable, non-staining and can be used in cold weather.

Uses: A deck caulking compound used around posts, up against the house where the vinyl and cant strip meet the house, or any place where moisture may threaten to seep in.

NOTE: 1 container will cover approximately 25 linear feet.

Description: 30 gauge galvanized metal flashing with non-return drip edge.

Features: Galvanized metal will not rust. Non-return drip edge to lead water away allowing the fascia board to stay dry.

Uses: Nail down 1/4" off the fascia board around the outside perimeter of the deck.

Description: 30 gauge galvanized metal cant strip to replace the use of wooden cant strip.

Features: Galvanized metal will not rust. Recessed back edge to allow for smooth, even caulking line.

Uses: Cant strip is nailed down in front of the building wall to allow a smooth transition between the deck and the wall. This will allow water to flow easily off of the wall and onto the deck.

Description: Finishing edge for a professionally finished look to the deck.

Features: Easy to install friction fit. Clean looking finishing edge.

Uses: To clip over the vinyl and flashing edge. Prevents curling of vinyl from the edge of the flashing.

Description: Roller suitable for applying solvent and water based adhesives.

Features: A flamed bonding process that embeds the fleece into the core. This allows the roller to perform with solvents without falling apart.

Uses: For applying adhesives to the deck surface as well as to the back side of the vinyl.

Description: A chemically activated, concentrated, all purpose cleaner and degreaser.

Features: Bio-degradable, economical, buffered pH, pleasant clean odour, free rinsing, non-flammable, convenient 1.9 L size dilutes to make up to 40 litres.

Uses: Ideally suited for cleaning and degreasing all around the house, yard, car, boats, RV's, Dek-Master® vinyls, sundecks, patios, concrete driveways, garden equipment, painted walls, fiberglass, aluminum and vinyl siding.

NOTE: Must be diluted with water to activate.

Description: The Deck Drain Assembly is designed for wood decks.

Features: Composed of 3 parts: the grate, the clamp collar and the drain body. It has a 6 1/2" deck opening with the 3 deck flange screws set at 7 3/4" diameter. The flange is 8" in diameter..

Uses: Designed for use on a plywood deck surface that is being covered with a vinyl membrane.

NOTE: Easy installation instructions included with each drain assembly.